Patton 1173 IP Camera Extender

Patton 1173 IP Camera Extender

The Patton 1173 Extends IP Video over 15 times its natural limitations--Extend high resolution IP Video up to 6,000ft over telephone grade twisted pair cabling
Use the Patton 1173 with any Camera with an Ethernet interface--Fully compatible with any IP cameras and its managing software
The 1173 by Patton is transparent to IP Video schemes--Fully transparent to compression schemes such as WMV, MPEG-4 and MJPEG
It has flexible Installation Options--Wall or DIN mountable
No Configuration Required-- The Patton 1173 Plug-and-Play
Ruggedized--Housed in a metal enclosure with an operating temperature of -10 to 70°C

Line Rates (AWG 24/0.5 mm)
Downstream in Mbps	Distance in feet (meters)
4	6,000 (1,830)
16	4,000 (1,200)
50	2,000 (610)

Patton 1173R/EUI-2PK
IP Network Camera Extender Kit; -10° to 70°C ; UI

Patton 1173R/CC/EUI-2PK
IP Network Camera Extender Kit; -10° to 70°C , conformal coated
(humidity 85% condensing from -10 to +35°C); UI

Applications

The Patton 1173 IP Network Camera Extender’s are ideal for delivering IP Video links to remote camera installations that are beyond the 328-foot (100-meter) distance limit of Ethernet. The 50 Mbps line rate eliminates bandwidth concerns previously experienced with other copper wired transmission technologies. By utilizing existing voice grade copper pairs, alarm circuits, etc. the expense and hassle of installing new cabling is eliminated.

Specifications

Line interface: RJ-45 (pin 4 = ring; pin 5 = tip)
Ethernet interface: 8-position shielded RJ-45. Auto-sensing 10/100Base-T with half or full-duplex operation. DIP switch capable of disabling 100-Mbps full-duplex for equipment that does not support 802.3X (Pause Packets)
Protocol: Transparent to high layer protocol. Supports 802.1Q VLAN tagging
Modulation: Quad Amplitude Modulation (QAM) 4-band
Duplexing Method: FDD (Frequency Division Duplexing)
Frequency Range: Up to 0–12 MHz
Line Rate: 50 Mbps

Temp: -10 to 70°C,
Compliance: FCC Part 15A, CE Mark, EMC Directive
89/336/EEC, Low-Voltage Directive 73/23/EEC
Power Supply: External AC and DC options: 120 VAC, and universal input (UI)—100–240 VAC, or optional -
48 VDC, -24 VDC, or -12 VDC
Humidity (Standard): Up to 90% non-condensing
Humidity (Conformal Coated): 85% condensing humidity from -10 to 35°C
Dimensions: 1.5H x 4.13W x 3.75D in.
(3.81H x 10.5W x 9.53D cm)
Weight: 0.4 lbs (0.18 kg) without power supply