The Data Connect 2178LRE2+/BP-MIL is a secure MILSPEC solution designed to provide bonded high-speed Long Reach Ethernet Extension over SHDSL on existing copper infrastructure, including Army WF-16 field wire.
In bridge mode the 2178LRE+/BP-MIL delivers Ethernet with full duplex symmetrical bandwidth at rates up to 4.9 Mbps at a distance of 5 miles. The 2178LRE+/BP-MIL transmits over 1 Pair in standard mode with TC-PAM 32 and can be used back-to-back without the need for a concentrator, multiplexer, or DSLAM.
The 2178LRE+/BP-MIL performs on IEEE 802.3ah EFM standards for advanced performance and management features. The unit is equipped with two MIL-SPEC A-A-59559 binding posts to provide high reliability at a low expense and with a maximum throughput.
The introduction of LRE copper bonding technology allows the delivery of a higher bandwidth over longer distances of multiple copper pairs that enable a good alternative in a place where fiber is not available or economical to deploy.
The 2178LRE+/BP-MIL provides a simple and clean solution for seamless integration into today and tomorrow’s networks. The 2178LRE+/BP-MIL is designed with a standard-based LRE technology 2BASE-TL. The actual
deployment is quick and simple over WF-16 field wire or other existing copper wires.
Features:
▪ Extending Ethernet Services over WF-16 field wire or other existing copper infrastructure
▪ Supports TC-PAM 32 for 5.7 Mbps over single pair copper
• Supports TC-PAM 64/128 for 15.296 Mbps (1-Pair)
▪ EFM Bonding up to 61 Mbps (4 pairs, TC-PAM 128)
▪ Flexible configuration as CPE or CO with LEDs to provide link status
▪ Secure tap-free point-to-point communications
▪ LED indicators provide LAN & WAN link status, power, alarm, and management status
▪ Auto negotiation and sensing for maximum end-to-end throughput over the available link
▪ Supports EFM OAM complying IEEE 802.3ah and 802.3i for 10BaseT application
▪ Low Delay, Jitter and packet loss for delay sensitive applications
▪ Comprehensive and easy OAM & P functions in provisioning and management
▪ QoS feature for guaranteed Ethernet service
▪ Future-proof Ethernet traffic management and QoS features
Standards : LAN 4-Port switching hub 10/100Base-T
Auto-negotiation & sensing Auto MDI/MDI-X
WAN ITU-T G991.2.(2004)EFM bonding (IEEE 802.3ah OAM) 2BASE-TL
Data Rate: N x 64 Kpbs (N=3~89) using TC-PAM 16/32
• Max. 5.696Mbps (1-Pair)
• Max. 11.392Mbps (2-Pair)
• Max. 22.784Mbps (4-Pair)
Data Rate: N x 64 Kbps (N=3~239) using TC-PAM 64/128
• Max. 15.296 Mbps (1-Pair)
• Max. 30.592 Mbps (2-Pair)
• Max. 61.184 Mbps (4-Pair)
Supports of Annex A, Annex B, Annex AF & Annex BG LAN Protocols 802.1d Transparent
Hardware Interface DSL: RJ-45 x 1, LAN : RJ45 x 4, Console Port x 1
MGMT: RJ45 x1, DC Power Jack x 1
Reset Button: Load Factory Default
Indicator LAN: Link/Act, 10/100 per port
System: Power, Alarm, Management
WAN: Link per loop
Management Interface Easy to use web-based GUI for quick setup, configuration and management
Menu-driven interface for local console and telnet access Password protected management and access control list for administration
SNMP v1/v2 (RFC1157/1901/1905) agent and MIB II (RFC1213/1493)
LRE OAM (IEEE 802.3ah)
Software upgrade via web-browser / TFTP
VLAN Support IEEE 802.1Q VLAN Tagging
Up to 8k 802.1q VLANS (ID Range 1~4094)
Port Based VLAN, VLAN Stacking (Q-in-Q)
QoS Support Rate limiting by rule-based/port-based
Traffic classification based on port/802.1p/ DSCP
WRR (Weighted Round Robin) / SPQ (Strict Priority Queuing)
scheduling algorithm,IPv6 (RFC 5430) pass through
Environment Operating Temperature: 0 ~ 50°C
Storage Temperature: -40 ~ 85°C
Relative Humidity: 98%, non-condensing
Regulatory ISO 9001 Quality Management, UL, CE Approval
Physical Dimension: 195 x 48 x 168mm (D x W x H), Weight: 1.3kg
Electrical AC Power Adapter (100 ~ 240VAC) 50/60Hz Auto Sense & Auto Switch
Memory 2MB Flash Memory, 8MB SDRAM
ORDERING INFORMATION
2178LRE2+/BP-MIL Long Reach Ethernet, 2W plus 4×10/100Base-TX, Milspec Binding Posts Extender
2178LRE4+/BP-MIL Long Reach Ethernet, 4W plus 4×10/100Base-TX, Milspec Binding Posts Extender
2178LRE8+/BP-MIL Long Reach Ethernet, 8W plus 4×10/100Base-TX, Milspec Binding Posts Extender